This also applies to the earlier models, the original and the mkII. Select Bus 2 in the mix bus menu. And the Oscar goes to See any errors on this page? No Longer Available Update Location close. Set the master fader level to 0 dB.
|Date Added:||15 December 2011|
|File Size:||35.23 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Using a MOTU Audio Interface as a Standalone A/D or D/A Converter
Use the Select and Set buttons motu 2408mk3 the front panel of the interface to choose these settings: Be the first to review this item. In this example, the mk3 is set to receive digital audio motu 2408mk3 See any errors on this page?
Motu 2408mk3 the balance control to 0. Wait about one minute for the new settings to be saved to the mk3’s internal memory, and motu 2408mk3 disconnect the FireWire cable from the back panel of the interface.
Notu the mk3’s sample motu 2408mk3 and clock source appropriately. This means one can hook up three ADATs, three DAs, and eight analog devices all at the same motu 2408mk3 and access any three banks in any combination of formats, and freely switch formats at any time.
These features allow one to slave the system to video, SMPTE time code or both, without a dedicated synchronizer. Choose the Mou tab, and select Bus 1 in the mix bus menu. Set the Analog fader to 0 dB. Set the mix bus output to ADAT A by selecting the output pair in the bus output menu above the mix bus master fader. The MOTU motu 2408mk3 audio interface automatically switches into a standalone converter mode when motu 2408mk3 is disconnected from the PCI card or when the computer is turned off.
This also applies to the earlier models, the original and motu 2408mk3 mkII.
Select Bus 2 in the mix bus menu. Reviews 0 Write a review.
– mk3 and 24 I/O analog inputs can operate at plus 4 db or minus 10 db
It is important that the clock source and sample motu 2408mk3 are set properly for both transmitting and receiving devices. Not specified by manufacturer. The mk3’s sample rate should match the sample rate of any connected digital audio devices. The interface will switch to the motu 2408mk3 converter mode.
The mk3 uses the second generation AudioWire protocol, a high-bandwidth digital audio format capable moyu carrying up to twenty-four channels of 96kHz digital audio in and out of the motu 2408mk3 at the same time. No Longer Available Update Location close. Update Unrecognized Zip Code. Choose the Inputs tab, and then motu 2408mk3 the Stereo button on the channel strips for analog motu 2408mk3 1, 3, 5, and 7. Connect the mk3 to the computer by FireWire, and turn on the mou.
From big screen to home studio: Mute all input channels except Analog The included PCI card features a powerful DSP chip motu 2408mk3 to creating a custom tailored monitor mix of up to ninety-six channels of 96kHz audio.
They motu 2408mk3 now appear as AnalogAnalogAnalogand Analog motu 2408mk3 G3 Power Mac or faster OS 9. Motu 2408mk3 system includes the PCI card and Audiodesk workstation software. Enter new zip code to refresh estimated delivery time. This configuration will be similar for all MOTU mtou interfaces with features similar to the mk3 such as the mk3, UltraLite mk3, and Traveler mk3.
Any three banks can be chosen to be active at one time. If the mk3 is the master clock device, then set the second device’s clock source to its ADAT optical input, and 2480mk3 motu 2408mk3 sample rate to match the 2408ml3 sample rate.
Download Navigation Tech Support.