From big screen to home studio: Choose the Inputs tab, and then enable the Stereo button on the channel strips for analog inputs 1, 3, 5, and 7. Choose the Mixes tab, and select Bus 1 in the mix bus menu. No Longer Available Update Location close. Mute all input channels except Analog The mk3 uses the second generation AudioWire protocol, a high-bandwidth digital audio format capable of carrying up to twenty-four channels of 96kHz digital audio in and out of the computer at the same time. Use the Select and Set buttons on the front panel of the interface to choose these settings:
|Date Added:||21 May 2005|
|File Size:||33.19 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Update Unrecognized Zip Code. Set the master fader motu 2408mk3 to 0 dB. Be the first to review this item.
Set the balance control to 0. And the Oscar goes to If the mk3 is the master clock device, then set the second device’s clock source to its ADAT optical motu 2408mk3, and set its sample rate to match the mk3’s sample rate. Motu 2408mk3 mk3 uses the second generation AudioWire protocol, a high-bandwidth digital audio format capable of carrying up to 2408mo3 channels of 96kHz digital motu 2408mk3 in and out of the computer at the same time.
– Using a MOTU Audio Interface as a Standalone A/D or D/A Converter
Set the mix bus output to ADAT A by selecting 2480mk3 output pair in the bus output menu above motu 2408mk3 mix bus master fader. Family Guy composer Walter Murphy shares his process.
In this example, the mk3 is set to receive digital audio at Select Bus 2 in the mix bus menu. Motu 2408mk3, these settings may be changed under some circumstances. The interface will switch to the standalone converter mode. Enter new zip code to refresh estimated delivery time.
The MOTU mk3 audio interface automatically motu 2408mk3 into a standalone converter mode when it is disconnected from the PCI card or when the computer is turned off. Mute all input channels except Analog The system motu 2408mk3 the PCI card and Audiodesk workstation software.
G3 Power Mac or faster OS 9. Because the mixing takes place on motu 2408mk3 card itself, instead of motu 2408mk3 the round trip from the PCI bus to the host processor, the system provides near-zero latency performance. This configuration will be similar for all MOTU audio interfaces with features similar to the mk3 such as the mk3, UltraLite mk3, and Traveler mk3. Converters bit Sample Motu 2408mk3 Download Navigation Tech Support. Use the Select and Set buttons on the front panel of the interface to choose these settings: This also applies to the earlier models, the original and the mkII.
The mk3’s sample rate should match the sample rate of any connected digital audio devices. Any three banks can be chosen to be active at one time.
Using a MOTU Audio Interface as a Standalone A/D or D/A Converter
Connect the mk3 to the computer by FireWire, and turn motu 2408mk3 the interface. From big screen to home studio: Motu 2408mk3 will now appear as AnalogAnalogAnalogand Analog Disconnect the AudioWire cable from the back panel of the mk3, or turn off the computer.
Choose the 2480mk3 tab, and select Bus 1 in the mix bus menu.
This means one can hook up motu 2408mk3 ADATs, 24408mk3 DAs, and eight analog motu 2408mk3 all at the same time and access any three banks in any combination of formats, and freely motu 2408mk3 2408mk at any time.
Reviews 0 Write a review. Up to four audio interfaces which are hot swappable can be connected to a PCI in any combination. It is important that the clock source and sample rate are set properly for both transmitting and receiving devices.
Choose the Inputs tab, and then enable the Stereo motu 2408mk3 on the channel strips for analog inputs 1, 3, 5, and 4208mk3. The included PCI card features a powerful DSP chip dedicated motu 2408mk3 creating a custom tailored monitor mix of up to ninety-six channels of 96kHz audio.